For a large stencil that makes a bold statement on any roadway, parking lot, or field, the 96" ENTER stencil is a must-have addition to any contractor’s collection. Stripers can use this large sign to clearly mark garage entrances, parking lot directions, freeway lanes, and more. It can also be paired with other roadway words such as “ONLY", “FWY", and more. This stencil is designed to meet all FHWA and MUTCD requirements and complies with industry standards. It is made in the USA and offers a warranty that guarantees that it will be delivered without any defects or impediments.
The measurements and specifications of this stencil can be adjusted to fit the individual needs of your project. Typically, the stencil will measure 96" in width when printed and 96" high for a clear and bold print upon the pavement. Each stencil provides 4" of overlap that can be adjusted accordingly, giving you the opportunity for a thinner or wider sign. The material itself measures 24" per piece, with a combined height of 104" for clear visibility. There is plenty of room on all sides to allow for overspray.
Select one of four available material grades for the make of your stencil. For a heavy duty project, the ?" LDPE is the recommended choices. This is named PRO-Grade LDPE as it is the industry standard, and most commonly used material for this type of stencil. It offers durability and rigidity, laying flat while withstanding up to 3000psi of spray painting power. It can be used and abused thousands of times over several years before ever showing signs of wear. The .080 ALU is even thicker, and offers an indestructible aluminum for infinite use. If you are interested in a smaller scale project or one-time use of the stencil, the 1/16" LDPE and the .030" HIPS are cost effective choices. They are flexible without sacrificing durability, and are great for custom projects.